Pontiac Solstice Forum - View Single Post

Quote:

Originally Posted by package

Anyone have access to a service manual that tells the proper way to remove the plastic cover? I need to route the temp probe from the windshied to the front bumper.. Too bad they don't make a wireless probe. Then I'd only have to power the probe, since there is already power inside for the map lights.

Not much detail in the service manual. But here goes. (Instructions given for attempt at your own risk

)

1) Remove sunvisors, looks like just one screw.

2) Remove upper windshield garnish molding. Probably by pulling. 6 retainers of some type, not specific if they are metal or "christmas trees" in plastic. Should be reuseable.

3) Windshield side garnish molding also appears to pull off. 2 retainers outer edge. Just about where the arc starts and halfway down the pillar.

Good Luck.

	Small Dealer Senior Member Join Date: Mar 2005 Location: Under an invisibility cloak, somewhere in the Northeast	Quote: Originally Posted by package Anyone have access to a service manual that tells the proper way to remove the plastic cover? I need to route the temp probe from the windshied to the front bumper.. Too bad they don't make a wireless probe. Then I'd only have to power the probe, since there is already power inside for the map lights. Not much detail in the service manual. But here goes. (Instructions given for attempt at your own risk ) 1) Remove sunvisors, looks like just one screw. 2) Remove upper windshield garnish molding. Probably by pulling. 6 retainers of some type, not specific if they are metal or "christmas trees" in plastic. Should be reuseable. 3) Windshield side garnish molding also appears to pull off. 2 retainers outer edge. Just about where the arc starts and halfway down the pillar. Good Luck.