Quote:
Originally Posted by 2KWK4U
The first picture in this thread shows you exactly how the airbag status indicator is mounted. It's two little screws/bolts. You might be able to get them out without pulling the IP trim off. The heads are 7mm (or 9/32"). You can probably color directly over where the high beam indicator is on the surface of the plastic sheet that has the speedo, tach, etc faces printed on it. It's pretty easy to pull the plexiglass cover off of the gauge cluster. Might not even have to take the gauge cluster out to do it... but you WOULD have to remove the big IP trim piece.
Cool, thanks ... I missed that thread. I don't think it would be too big of a deal to pull that airbag light if it's just those two bolts. I didn't bother trying to actually take it out since I didn't have anything to replace it with anyway, but I was able to get my hand back there, so a ratchet should be able to get those suckers off. Knowing the size will help since I won't have to fumble with it blindly for multiple tries. Thanks for the info.
As for the highbeam indicator, I got to that through the instrument guage cluster without actually pulling the dash also ... I got the plexi off in addition to the small black spacer behind it and they can both come out through that same hole if you turn them right. But I don't want to actually darken anything permanently. I tried putting a small piece of tint directly over the indicator light, but the stuff I had didn't seem to help much, so I may try getting some limo black tint or something for it if I don't come up with something better.