Chuck,
Excellent instructions. I did a very beautiful grey/black marble this weekend.
A couple of tips to add.
(1)The primer stick does have an actual brush built into it. Use your primer for the critical bends.
(2)Do your pre-bends over a socket or rounded edge to follow the cars format. Especially
the hand brake piece. The pieces are flat.
(3)If you ordered the extra door panels and on any long pieces, you can peel off the red backing little by little. Start at one edge and work down.
(4)use a hair blow dryer, not a heat gun to loosen up the pieces that need to be bent.
The kit is cut perfectly. High marks for them.
__________________
Team Solstice 2009
How I built my solstice:
http://www.cardomain.com/ride/2661209
2008 show sponsors: Team Solstice 2008, JPM, Wind Restrictor, Werks, Aspis, Norm's Fiberglass, DDM, AfterShock, Universal Studios, Cardomain, Easystreet AirLift, , Parkerracing, Madmods-Motorsports, Scap. To be a sponsor, just pm me.
See madmods in the upcoming Fast & Furious 4.
2009 Colorado Nationals attendee! I will be there and want to
party with everyone. Some of you owe me a beer.