Hi. Just thought I'd share some Mach pics. For those of you waiting for the Mach kit and Cat I think we are still a few weeks out on the cat. Quick cat update - We were able to get the engine light off by moving the O2 bung closer to the cat and also using an extender. This was tested for over 300 miles and no light!! During this time we had a rash of these cats coming back to our shop ( installed on non GXP cars 6 months to a year ago ) with the whole stainless coil moving up and down. Upon looking into this further we decided to go with another cat manufacturer. This manufacturer cans the coil differently and will not come loose. The cat is longer and therefore we are starting the process over to try and get the O2 sensor closer to its original position. With the different length cat all the positioning we did before will change. Many of you are waiting for the cat to be fixed before you want the Mach kit. Since it may be a while just PM me if you want the catback and we will ship the cat separately when its ready. As a side note when I went to the cat plant to talk to them about how they construct the cat etc. I noticed a lot of Solstice and GXP posters up. Turns out that this company makes the metal housing for the Sol and GXP motor mounts. We are currently testing a new cat and hope to conclude this process soon. Thanks.