View Single Post

Old 04-28-2007, 02:05 AM
  
Exhaust Depot
Supporting Tuner

Exhaust Depot's Avatar

Join Date: Feb 2007
Location: Ft. Laurderdale
Quote:
Originally Posted by Pangloss View Post
Ok, I've cleaned up and standardized the terminology and directional indicators, and made a few other minor edits here and there. I also replaced Image #3 with a version that's labelled within the image (my humble photoshop efforts don't seem to be blocking anything important, so I think I'll go with just the labelled version, since the next image shows the same thing in close-up).

If there are any other suggestions please feel free to pass them along. I'm still looking for online purchasing links to the little bits and pieces needed for the mod (see post #1).

Just go to autozone and look for a T that says 3/16" on it. Its that simple. Then get the assorted pack of vacuum plugs.

I did not zip tie the plug in this pic because the nipple went on super tight. I recommend you zip tie the cap anyways just in case.
Exhaust Depot is offline
Reply With Quote