Quote:
Thanks to everyone for the replies and I bought the red braided high temp (~450 degrees) hose at Autozone. It comes with about 5-6 different sizes and I only used about 1/3 of the hose enclosed in the bag. The cost was $39.99, but they gave me $4 off (10% military discount), so the job was pretty low ($36) cost.

I only did the vacuum hoses, radiator hoses, and hot side IC hose. I may see if there is a way to cover the electrical wiring, but I wanted to get the easy stuff done first. The longest part is heat shrinking the ends the radiator clamps were a little tight. BTW, make sure to have a rubber cap handy when you pop the hose that connects to the radiator.

Total time for this mod ~1 hr ... add time to go to Lowes and buy a cheap heat gun and it took about 1.5 hours.

I keep saying the ECU Tune (when avail) is my only mod left, but I keep finding new stuff.
Steve