Quote:
Originally Posted by
Low2s2u
why do you need the relay for the blinker sound? Is it built into the factory HU originally? Do the clicks sound the same with the added relay on the aftermarket unit?
I'm looking to get the D3 and install it myself. Just need a little info before jumping the gun and spending money.
chris
The blinker clicks are built into the head unit or the signal for it at least. When you remove it they will be removed as well. The GMOS harness will add back the signal, but you need the relay to actually make the clicking sound. It sounds very much like the orig blinker sound, possibly a bit quieter. Installation was very easy, it took me longer to find the correct Relay from NAPA auto parts. Power and ground can be tapped from the stereo harness.
__________________
Mean GXP Delivered 1/30/2007 $MSRP +$2K
My Stereo Install-->
Ultimate AVIC D3 Install thread
Team Solo Performance
Team Solstice 2008
Pioneer Avic D3 - Nav System
JL Audio ZR speakers, Alpine PDX 4.150 amplifier
Solo Performance Street Race exhaust
JPM custom center console, handles and shifter
Painted dash and windshield surround
Custom Valentine1 flush radar display
Debadged rear lettering
K&N Air Filter
OZ Ultraleggera Wheels
DDM Works Big Brake Kit