Quote:
Originally Posted by
Jack B
It cannot show 100% true TP, the GM voltage is approximately 4.2 volts at WOT. Therefore, WOT is shown at approximately 80-85%. Commanded TP will show 100%. I would assume that if you log both you will see the reason for the limp mode, commanded will be 100%, however, the actual will some number far less than 80%.
I'm not sure how many times I have to say this. I have, I did. I have a log showing 100% TPS. I also have logs not showing 100% TPS. It just so happens the car throws a TPS code once the car started not showing 100% TPS. hmmmm.