View Single Post

Old 07-10-2007, 07:59 PM
  
carlintexas
Member

carlintexas's Avatar

Join Date: May 2005
Location: Muenster, Texas
Well, I had the Fidanza billet flywheel and Spec stage II+ clutch and pressure plate installed. I'm not ready to recommend it at this time. I have a vibration that started after the install. I've been in contact with Spec and they feel it's not their equipment and it's either a bad install or the noise & vibration are 'normal'. It best not be normal - or I'm pi$$ed!

So - I ordered and have received a clutch/pressure plate for a GXP. I'm going to see if it will bolt up to my stock flywheel. If it does the next step will be to drop the transmission down and check the Spec installation. If there is no obvious install problem (loose bolts, wrong bolt pattern, etc) I am going to assume that the Fidanza/Spec combo is a problem and it's coming out, to be replaced with the GXP clutch.

Madmods, that was a long answer - but that's my status.
__________________
TEAM SOLSTICE 2008
NASSOA(tm)
Founding Member #2
1st 1K #781
DDM Custom Turbo System
DDM Pro-Beam, A-Pillar Pod, PLX gauges
Starlight red I/C pipes and coil cover

GReddy Profec B Boost Controller, HKS BOV
3" Magnaflow cat-free
Werks radiator / Precision billet grilles
Norms vented fenders / GXP Spoiler
Riken Raptor's 255/45/18
carlintexas is offline
Reply With Quote