View Single Post

Old 02-29-2008, 08:29 AM
  
SmokinSolstice
Founding Member

SmokinSolstice's Avatar

Join Date: Mar 2004
Location: Quad Cities, Iowa
Quote:
Originally Posted by xtrememedic View Post
Hey man
I installed the SOLO SQR2 with the help of a friend. Like stated earlier if you have a friend that owns a garage with a lift or even a drive on lift install would go alot faster.
But if you dont I used 2 gator ramps for the front and lifted the the back end up and placed 2 jack stands in the back. Had plenty of room to get under the car.
Yes the exhaust is alot easier than the headers.
I put on the headers and SOLO Hi-flow cat.
Remove 2 bolt from the cat there is a hanger in the middle of the car and the hangers in the back. I put alittle soapy water on the rubber hanger to ease them off.
It will talk alot less time than the headers did.

Awesome! Great info and that looks to be the way I am going to with the ramps and jack stands. I am glad it is easier than the headers I hoped it was. Thanks again.
__________________
Team Solstice 2008

Ordered 11/12/05
Black, manual trans, Premium package, power package, convenience package, floor mats, AC, XM radio, LSD, and Polished Wheels Produced 6/1! VIN:18718

Mods: Fujita CAI, Stubbie Attenna, Lil Chromies, Third Brake Overlay, 35% Tint. Solo Headers, Solo Exhaust.
SmokinSolstice is offline
Reply With Quote