Quote:
Originally Posted by Go-N Def
Whoops, missed that. I had a long day of driving yesterday, about 700-750 miles.....
Anyway, since you don't have an air box, try loosening the mount and then pushing the pipe inboard. Get someone or something to hold it in place and tighten everything back down. Should wrk....
|
I am going to try that today
but it appears that it will not go too much further and keep the mount by the horn lined up.
Quote:
Originally Posted by Topcat
When you say Short? Do you mean that with the motor side connected and the brackets lined up the Pipe looks like it could be a little bit longer to fit completely in the intercooler coupling?
I noticed that my front bracket the one that mounts to the front of the car was too low, so mine isn't even connected to the car.
|
I used the mounting brackets, but that made the gap on the engine side appear to be bigger than it should have been ... for the supplied coupler. The Drivers side went on "like a glove" but the Passengers side seemed like either the coupler, or the pipes were as SB said a little short. I eventually made it work, but it was MUCH harder to do than the drivers side.
