Quote:
Originally Posted by
rlhammon
Rudy... can you give rough dimensions (three legs of the "triangle"). I might order up some more magnetic sheet and cut my own designs.
And... you CAN paint this material (at least the stuff I used for my autocross numbers). I'm thinking of mocking up a set and painting it Mean to see how it looks.
I know that I can get one complete set (left and right) from a 16" x 24" sheet. The longer horizontal length of my current profile is slightly less than the 16" length. And the height is less than 12". As long as you stay within that foot print of material, then you'll be fine. However, depending on your design profiles, it may exceed the given dimensions. Try using a paper template of those given dimensions, and place it on the fender to see if it fits the size that you are thinking about. Hope this helps.
Thanks for the tip on the painting. Don't you need a flex additive in the paint to keep from cracking though? And are you talking about painting directly on the vinyl material or magnet itself?
rudy