Pontiac Solstice Forum - View Single Post - Exhaust Manifold Bolts.....

Wow...this does seem to be a bit more widespread than I thought. I'll have to contact them and ask them to send me out a new updated one. Mine is warped and not much use in modifying that one. If they are aware of updates like this, they should let us know.

I just spent a fair bit of money having this fixed and now I'm going to have to do it all over again.

I can do it myself but just don't have the time. This is my daily driver. Anywho....Thanks guys for all your feedback on this....especially clear !!!

I will contact them and see if they have changed their manifold design.

Thanks guys !

Quote:

Originally Posted by ClearBraInstall

I had the same thing happen to me just a few weeks ago. I had to send my manifold back to Hahn. They did some updates to it and it appears they actually cut a relief in the hole closest to the firewall and put more space between the flanges. Just sent the manifold back to hahn and they took care of it. I would get in touch with Aaron or Bill and see if your manifold has been updated.

Good Luck.

Clear

__________________
Ottawa, Ontario, Canada
2007 - 2.4 - Black - Hahn Stage 3, Hahn Hi-Flow CAT, Solo SQR-2, Norm's Finned Diffuser & Fenders, GReddy BOV & PRofec-B Spec-II B/C, Autometer Mech Boost & Electric Oil Temp gauges, DDM Two gauge A-Pillar POD & Powdercoated valve & engine covers, Illuminated WR, JPM Centre Console, Arm Rests & Visor Covers, Stubby Antenna
Team Solstice 2008

	opjohn Member Join Date: Jun 2007 Location: Ottawa	Wow...this does seem to be a bit more widespread than I thought. I'll have to contact them and ask them to send me out a new updated one. Mine is warped and not much use in modifying that one. If they are aware of updates like this, they should let us know. I just spent a fair bit of money having this fixed and now I'm going to have to do it all over again. I can do it myself but just don't have the time. This is my daily driver. Anywho....Thanks guys for all your feedback on this....especially clear !!! I will contact them and see if they have changed their manifold design. Thanks guys ! Quote: Originally Posted by ClearBraInstall I had the same thing happen to me just a few weeks ago. I had to send my manifold back to Hahn. They did some updates to it and it appears they actually cut a relief in the hole closest to the firewall and put more space between the flanges. Just sent the manifold back to hahn and they took care of it. I would get in touch with Aaron or Bill and see if your manifold has been updated. Good Luck. Clear __________________ Ottawa, Ontario, Canada 2007 - 2.4 - Black - Hahn Stage 3, Hahn Hi-Flow CAT, Solo SQR-2, Norm's Finned Diffuser & Fenders, GReddy BOV & PRofec-B Spec-II B/C, Autometer Mech Boost & Electric Oil Temp gauges, DDM Two gauge A-Pillar POD & Powdercoated valve & engine covers, Illuminated WR, JPM Centre Console, Arm Rests & Visor Covers, Stubby Antenna Team Solstice 2008