|
I guess I dont have the whole picture without turbine inlet pressure.
But this is the compressor we're talking about here. What's bugging the hell out of me is htat it's happening at 18-22lbs/min. well in the nice island.
Maybe I'll take the compressor housing off and see about extrude honing it for increased A/r. THis will broaden the Map.
I also am looking into the possibility of
1) making a reflow housing
2)getting a wheel with a larger exducer
3)larger turbine wheel.
Last edited by BaldTurboFreak : 09-16-2008 at 03:05 PM.
|
