Quote:
Originally Posted by mminhas
Hi Gunnys GXP
I actually got the idea from your post. Its a very good idea, I am trying with 2 red LEDs on each side. I saw your post and the pictures show light blue and black.
Does it matter which position of the wire I connect them to. Basically I have tried connecting them after they split off and before. At a point the wires split off and connect into this "white thing". I don't know what that is. Where should I be connecting the wires or does it not matter at which length I connect them at as long as its the right color.
 |
It shouldn't matter where in the line you splice it (current doesn't care) and the blue and black wire should be the right ones. I spliced in right behind the bulb plug for the signals. Are the two wires for the LED's both copper or is one silver? If there is a built in resister in the LED the current will only flow in one direction so it may be wired backwards. You asked about a coating on the wire. Does one of them have like a red tint to it? If it does then it is coated and you'll need to melt that off with a lighter before you connect it or it won't work.
__________________
DEEP, GT KIT,RK RAM AIR HOOD, DUAL WING, UP-SHIELD, EIB SPRNGS, DEJON CAI & I/C PIPES, CSTM EXHAUST,CSTM PAINT AND GRAPHICS, RMR STYLE BAR, LED AND ACCENT LIGHTS, CSTM GAUGE FACE, DASHHAWK, LAMBO DOORS, AVIC F700BT NAV, BONUS SUB & AMP, Prem. pkg w/leather, A/C, Auto, 18" chrome wheels, sport pedals.
"BLUE DEMON"
"For those who fought for it, FREEDOM has a flavor the protected will never know"
Former WCKCC member. Now MKC member.
Last edited by Gunnys GXP : 01-10-2009 at 09:13 PM.
|
