The BTF Racing stage one GT3076R GXP/REDLINE kit has been sufficiently tested and is fixtured for production.
As many of you who have been following the thread in 2.0 turbo know, it is the complete hardware nessicary for some serious power. This turbo upgrade will get you to at least 450whp before it runs out of breath.
So far our test mule has shown a 90Ft/lb advantage over the stock turbo at trq peak w/stock boost pressures with NO OTHER MODS!
The powerband for this turbo is 3300-8000+
I would expect the HP peak to be around 7200rpm
Ideally you should use a 3" or larger catback for maximum power, however Im still running the stock exhaust on our mule. (it is starting to get restrictive though,couple psi up top.)
My kit consists of the following:
1) Ball Bearing Garrett GT3076R w/custom Tial SS housing in your choice of A/R
1)Mild steel Catless downpipe (v-band no gasket at the turbo to leak)
1)Black 38mm Tial wastegate w14.7psi spring
1)Bosch recirculator valve
1)4" intake pipe with enourmous cotton-gause filter (for C6 vette)
2)6mm oil drain bolts
1)6mm drill bit
1)braided oil feed line
2) 4" hoseclamps
1) Garrett turbine speed guage/datalogger kit (part #781328-001)
your choice of color in powdercoat on the intake and compressor housing
1)pre-addressed box for your PCM to be shipped to Wester's Garage for the GT30R hotflash. Sold seperately. As of 8/1/08 Wester's garage will handle the entire electronic end of our stage kits.
This group buy is availible for forum members only since you guys and gals helped me forge it into the ideal shape for us. It comes WITH the turbo tach only during the first batch.
For powdercoat colors go to
Plating Kits Electroplating Kits Aluminum Anodizing Kits Powder Coating Systems Metal Polishing And Buffing Supplies - Caswell Inc.
After the group buy is over, the kit will be availible thru New Era Performance parts and other fine vendors for $3399.95 With or $3039.95 without garrett turbine speed guage.
So basically you'll save over $450 dollars for being part of the show and among the first. Its my way of saying thankyou for your input.
To order is simple: Post here with what color you'd like your setup. Paypal $2949 to
Baldturbofreak@baldturbofreak.com. I'll request the shipping cost for your address when it's ready to go out the door.
Or- call the shop phone Mon-Fri 9am-6pm eastern standard time. ( the #under contact us on our web page) and I'll personally take your order. (all major CC's accepted)
A complete intake,turbo, and downpipe to get you up to 525hp flywheel from your sky/solstice for under $3400 (or under 3k if your in the 10) pretty
Wouldnt you agree?
Please post any questions on the thread in 2.0T mods, only post in here if your ordering.
I have also decided to make the blowthru/blowoff and option for those that don't want the turbotach. You can have the driver's chargepipe & Tial for the same money.
