Factory Direct Group buy! 10 spots only, $2949 + shipping - Page 5

skynv · 08-20-2008, 05:08 PM

Little off topic, but does this place in Rochester do dyno/tunes for the Sky?

BaldTurboFreak · 08-20-2008, 05:34 PM

MIke hasnt really touched them yet, But Im bringing him up to speed with my car.
But for now, I'm availible to tune your car there.

BaldTurboFreak · 08-20-2008, 07:25 PM

Okay an update:
THe GT35R price difference is more than I thought. THe GT30R CHRA comes with a compressor housing. THe gT3582R CHRA does not.

So the total difference in pricing is going to be $190 from stage one to stage two.

GreasyJockey- I already quoted you so this one is on me.

BaldTurboFreak · 08-22-2008, 11:35 PM

Update:
Went 12.86@109.5 with 19psi and a 2.0 60ft.

Air was muggy as hell, but the track prep was awesome.
I think a bottom 12 sec pass is in there with just a harder launch and better air.

BaldTurboFreak · 09-10-2008, 05:58 AM

Heading down to New Era this moringin to meet GReaseyjockey there.
We'll see what a stage 2 Gt35R kit smacks down...

BaldTurboFreak · 09-10-2008, 09:31 PM

OH snap. undynotuned,18-19psi,2?psi with surge had to abort. Going to machine the Gt35R housing for a reflow so it will eliminate the surge. Severe surge, no matter how much overlap is programmed into it.. But after the rflow is in it will make it scream like a T51R.

BaldTurboFreak · 09-10-2008, 09:38 PM

Here's the torque.

BaldTurboFreak · 09-10-2008, 09:53 PM

hahah I just noticed BIll hahn Jr talking Shiit about my turbine housing... Nice!
As if his upcoming kit wont have any welded joints in them!!!

It doesnt matter anyway. IF your housing (that is made from sch 40 316L not the Shiit 304 that everyone else uses) EVER cracks send it back. I offer a lifetime warranty on craftsmanship/engineering.

oldskool · 10-08-2008, 11:39 AM

Quote:

Originally Posted by BaldTurboFreak

hahah I just noticed BIll hahn Jr talking Shiit about my turbine housing... Nice!
As if his upcoming kit wont have any welded joints in them!!!

It doesnt matter anyway. IF your housing (that is made from sch 40 316L not the Shiit 304 that everyone else uses) EVER cracks send it back. I offer a lifetime warranty on craftsmanship/engineering.

Would you mind linking me to that thread? There seems to be a lot of that on the sky forums as well.
Do you still have slots for the free install, just out of curiosity?

BaldTurboFreak · 10-08-2008, 01:45 PM

It's in the HRC/PPC first impressions link below.

One slot left for the install. 6 more on the group buy.

oldskool · 10-08-2008, 03:49 PM

Thank you for the quick response. I read that thread on HHRSS. Although he does not specifically point toward your product, an unsuspecting reader would have no choice but to conclude that because its the only other product mentioned. Its a shame when vendors need to talk ish on others to get attention.

My fingers are crossed that this will still be available 1Q2009...

joshmass · 10-09-2008, 05:53 AM

I'm hoping for the same. I plan on making this purchase in January.

BaldTurboFreak · 10-09-2008, 09:53 AM

Five slots left....

sky888 · 11-12-2008, 07:46 PM

four slots left this coming friday!

BaldTurboFreak · 11-13-2008, 07:53 AM

Spraying meth on top of 22psi of GT30R is gonna rawk!
Maybe I bring along some map clampage to your dynotuning....