Seeking engine/transmission

KevinG · 01-05-2013, 09:51 PM

Hi, I am a new member and I am seeking an engine and tranny. I would prefer a 2.0.. but will be very happy with a 2.4.. mated to a 5 or 6 spd tranny. Would also like to get the harness/ecu for same. Mileage not important.

I am looking for something as close to Toronto Ontario as possible.

Thanks

compression · 01-06-2013, 07:25 AM

Quote:

Originally Posted by KevinG

Hi, I am a new member and I am seeking an engine and tranny. I would prefer a 2.0.. but will be very happy with a 2.4.. mated to a 5 or 6 spd tranny. Would also like to get the harness/ecu for same. Mileage not important.

I am looking for something as close to Toronto Ontario as possible.

Thanks

I bought 3 engines in he last year from the local junk yards in the GTA area. They all were 2.4L engines. Cost was about $500 each.
If you need more help looking them up pm me.

TomatoSoup · 01-06-2013, 07:56 AM

Quote:

Originally Posted by compression

I bought 3 engines in he last year from the local junk yards in the GTA area. They all were 2.4L engines. Cost was about $500 each.
If you need more help looking them up pm me.

Wow. What did you want with 3 engines? (Enquiring Minds Want To Know!)

Treeman · 01-06-2013, 08:33 AM

Why, he's working on a12 cylinder!

Sent from my SCH-I535 using AutoGuide App

compression · 01-11-2013, 02:14 PM

Quote:

Originally Posted by TomatoSoup

Wow. What did you want with 3 engines? (Enquiring Minds Want To Know!)

I bought a new turbo kit from werks, and we were playing with the tune a little bit. No fault of werks. The first engine the timing chain let go and blew a hole in cylinder 3 and got lost some where in the oil pan. The second motor was a head gasket. And the 3rd motor is in the car with the normal werks tune. The head gasket motor is getting fully re built now. should be able to handle a ton of power next year. I'm not in a rush to get it built as I'm thinking about selling the car in the spring time.

KevinG · 01-13-2013, 02:03 PM

@ compression...

You got engines for 500... that is good to know... I will contact you soon regarding this.

@ everyone, anyone

I am wondering if the bell housing for a 60*v6 RWD will fit these engines?
If not then I need either a tranny or the bell housing... preferably the bell housing.

I am in pursuit of the harness and ecm for the same.

Thanks again.

rolla_rage · 01-15-2013, 12:25 AM

Quote:

Originally Posted by KevinG

Hi, I am a new member and I am seeking an engine and tranny. I would prefer a 2.0.. but will be very happy with a 2.4.. mated to a 5 or 6 spd tranny. Would also like to get the harness/ecu for same. Mileage not important.

I am looking for something as close to Toronto Ontario as possible.

Thanks

I was in contact with a fella named Brad, he had a 2009 Cobalt LNF engine /ECU on Kiiji in Toronto back in December. try him here: sixxty7@hotmail.com

-J

rob the elder · 01-15-2013, 11:32 AM

I have a transmission from a 2.0 sitting on the shelf. 24k miles.

TNT63 · 03-26-2013, 07:43 PM

I have a brand new 5 speed trans for sale. Check link for pictures. Send me an email at eric@gdsamps.com if interested. Pontiac Solstice Aisin transmission

blueridgespeed · 04-16-2013, 07:23 PM

I have collected, at some expense and significant effort- a full 2006 Solstice driveline. Low-mileage engine from a solstice coupe pulled for LS swap. ECU, accesories, belts, radiator, fans, wiring harness... 5-spd Aisin NOS in Crate from GM! that hurt my wallet. Anyway, $2k plus shipping, no handling or crating fees, I'll do the work on that... If you're interested.

klaaren12@frontier.com