--Map Light and Footwell MODS

[Im2damnsexy]

If you do my car, I'll cook you a great meal!

[RDT253]

Originally Posted by Im2damnsexy If you do my car, I'll cook you a great meal!

I'd Love to...but I'm in Texas....I think its a little far from where you are isn't it???

[PAO]

what was your source for the LEDs and clusters?

[bPrevalent]

Okay, now for the stupid question.... Why are you recirculating the AC with the top down?

[MikePhDPE]

it seems to me that recirc blows more air. with the top down, i want as many CFMs as possible.

[RDT253]

Originally Posted by PAO what was your source for the LEDs and clusters?

I ran two wires from the rearview mirror through the top windshield frame...and down each pillar to the footwells....you can't see any wires...very clean installation

Originally Posted by bPrevalent Okay, now for the stupid question.... Why are you recirculating the AC with the top down?

Haha, I wasn't driving with the top down...dont have a windscreen...it was raining...and my car was dirty from the three week long rain ....but when the top is down...I guarantee you the recirculation is off!

[PAO]

Originally Posted by RDT253 I ran two wires from the rearview mirror through the top windshield frame...and down each pillar to the footwells....you can't see any wires...very clean installation Haha, I wasn't driving with the top down...dont have a windscreen...it was raining...and my car was dirty from the three week long rain ....but when the top is down...I guarantee you the recirculation is off!

sorry when I stated source...meant where did you buy them from?

[V10Venom]

Nice!! Wish I had the ablilty to do this.

Now go put some gas in and lose the low fuel light

[Willy]

John,
Please tell me which is BCM connector and if the alpha/numerics are on connector? I'm looking to use regular 12V incandecent bulbs in footwells but I suppose I'll need to buffer with transistor or mini relay?
Thanks,
Bill

[JRinKY]

C3 is the large rectangular one that lies horizontally across the BCM just above most of the fuses. I don't remember if the terminals are labeled, but I think they are. If you look at the face of the connector, one corner has an unusually large pin. With that at the top left, A1 is at the top right.

A3 is Dark Blue / White
A10 is Grey

[spider]

I don't carry a phone...+ I used heat resistant colored plastic (theatrical light gell) behind the lenses for ambiance.

[Willy]

Hey John,
Please tell me where BCM connector C3/A3 for power and C3/A10 for ground are?
My Sol is new to me ... just getting around in it .... I am good with wires.
Thanks, Willy

[JRinKY]

Willy : Hey John, Please tell me where BCM connector C3/A3 for power and C3/A10 for ground are? My Sol is new to me ... just getting around in it .... I am good with wires. Thanks, Willy

Peel down the passenger side footwell floor carpet. Under that is a panel velcroed to the floor. Pull that loose, and you will see the BCM (Body Control Module). Connector C3 is right there.

[Im Fastr]

very cool

[Willy]

Thanks John .... I'm after the connector and wires ... I'll let you know how it goes.