I just finished the install of my DDWMorks Stage II Supercharger, DDMWorks Long-Tube Header and High-Flo Cat, DDMWorks Pro-Beam, and DDMWorks Energy Bushing. All I can say is the quality of the components I received from DDMWorks was impressive. The install of the exhaust was strait forward. The installation of the supercharger was no problem. The Pro-beam attachment was easy. The only small problem I had was trying to take off one of the rear-dif bushing bolts. I had to take the car to my gear-head junkies house and borrow his pneumatic tools. All in all, I really enjoyed the install. I took my time, and I read and re-read the directions before I did a section. Tonight I will fire it up and let you know how it runs. Hope you enjoy the pictures.
[IMG][/IMG]
[IMG][/IMG][IMG][/IMG][IMG][/IMG]

__________________
2006 Aggressive with DDMWorks Stage II Intercooled Supercharger, DDMWorks Long tube header and High-Flow Cat, DDMWorks Pro-Beam, DDMWorks A-Pillar Pod with Autometer Boost and Volt guages, Magnaflow Dual Outlet Exhaust, Gravanna J2 Staggered 18 inch wheel set, Goodyear Eagle F1 A/S 245/45/18 front 275/40/18 back tires, Custom Fender Vents, Custom Hood, and Racing Stripes.

Welcome to the club!

Looks like you did a nice neat job. Enjoy the power!

Jackknife

__________________
Deep, Ebony, Loaded...VIN 2124

DDM Supercharger #6 Stage II Intercooled
Magnaflow Dual Cat-back ... Valentine 1
FE3 sway bar ... Car. Cust. Rests and Pockets
Norm's Dual Rear Fascia ... Visor Decals
Walnut Burl Dash ... Dual Horns
Blacked-out Grills ... Debadged
Boost & A/F gauges ... KappaShield
DDM Pro-Beam and back brace

Listen to 'er why-ee-eye-ine..

I'm very jealous RX. Wish I could do this project myself. Perhaps this fall.

Let us know how she performs for you.

__________________
2006 2.4 Solstice
Envious/Darkside/cloth int.
Limited Slip Diff, Sport suspension
GM Factory black mud guards

Alarm system
Airbag cover decal
Tony's slotted backup light covers
DDM Intercooler
DDM STAGE 2 Supercharger
DDM Stainless Coil Cover
DDM High Flow Catalitic Converter (still in the box)

Wish List
Aftershock side markers
Tony's Stripes
Solo SQR2 dual center exhaust
Norms Center Diffuser style rear fascia, fenders and skirts
Audi style headlights
DDM Backbone

Looking Good, Rx! You'll be joining the 0-60 in 4.6 club!

__________________
TEAM SOLSTICE 2008
NASSOA(tm) Founding Member #2
1st 1K #781
DDM Custom Turbo System
DDM Pro-Beam, A-Pillar Pod, PLX gauges
Starlight red I/C pipes and coil cover
GReddy Profec B Boost Controller, HKS BOV
3" Magnaflow cat-free
Werks radiator / Precision billet grilles
Norms vented fenders / GXP Spoiler
Riken Raptor's 255/45/18

Looks awesome!! Throw up some fender pics!! Love them

__________________
2004 Dodge Ram SRT-10 - 500HP/525 ft/lbs!!

Previously known as "SolScuba"

Here you go Solscuba, a better close-up which will show more detail.
Rx4theSol[IMG][/IMG]

__________________
2006 Aggressive with DDMWorks Stage II Intercooled Supercharger, DDMWorks Long tube header and High-Flow Cat, DDMWorks Pro-Beam, DDMWorks A-Pillar Pod with Autometer Boost and Volt guages, Magnaflow Dual Outlet Exhaust, Gravanna J2 Staggered 18 inch wheel set, Goodyear Eagle F1 A/S 245/45/18 front 275/40/18 back tires, Custom Fender Vents, Custom Hood, and Racing Stripes.

Looking great!

__________________
So high, so low, so many things to know.

VIN 8694 delivered on February 3rd, 2006. Two years later and I'm still enjoying it just as much as the day I took delivery.

DDM Stage II and Spec 2+ clutch/flywheel finally installed :)

RX4thesol:

Really like your fender vents! Did you do them yourself or are they custom made and if so, where did you get them?

Thanks for the great pictures, you car looks great!

Frank I

__________________
07 Black GXP

Current Mods:
Leather, Suede and Embroidered Interior by JPM
SOLO Performance Mach Exhaust
SOLO High-Flow CAT
Hahn Intercooler
Westers Tune
Fijita Intake
Dashhawk
Beltronic G-Meter
Painted Calipers
Custom Painted Engine Cover, Intercooler Pipes and Fuse Box

Future:
DEI Cry 02 System for air & fuel cooling
Slotted & Drilled Rotors
Wide Body Kit if I can ever find one that I like

Frank I.
I hated the half moon dent in my car after I took the badges off it. I came accross a picture of the 2008 Shelby Cobra Concept car which had fender vents I really liked. I took the pictures and the car to my local body shop and they made them from scratch. The built the fender box and the rest is what you see. They charged me $400.00 for both. Hope this helps.
John
aka, Rx4theSol

__________________
2006 Aggressive with DDMWorks Stage II Intercooled Supercharger, DDMWorks Long tube header and High-Flow Cat, DDMWorks Pro-Beam, DDMWorks A-Pillar Pod with Autometer Boost and Volt guages, Magnaflow Dual Outlet Exhaust, Gravanna J2 Staggered 18 inch wheel set, Goodyear Eagle F1 A/S 245/45/18 front 275/40/18 back tires, Custom Fender Vents, Custom Hood, and Racing Stripes.

These are soo nice, you should make a mold and start to sell them. Or have someone make a mold from them.

Agreed...those are really nice!!! I thought they were from the Sky when I first saw them.

__________________
2007 Mysterious GXP
INTRUDER Modifications (74)

TEAM SOLSTICE 2008
Supporting Member of Solstice Forum

Northeast Mod Meet
Friday, January 2, Saturday, January 3 and Sunday, January 4

Exhaust Sound Clips

Yes someone needs to sell those they are by far my favorite that I have seen. I would buy these in a minute.

__________________
Red Bull Drift Team 2008
Solo Mach and High Flow Cat
Dejon Intercooler, Intake Elbow, BOV spring
Wester's Garage RACE tune II
JPM custom shifter.
Barney Juice with Militec-1
GM Auto-dimming mirror with OnStar and maplights
Rhys Millen Racing, RMR Style Bar.
Peak RWHP 286.3, Peak Torque 313 ft/lbs.
SSR Type C wheels, Bridgestone Potenza RE-01's
DDM Works PINK Breastplate

NASSOA In Great Company! Founding Member

Rx4theSol,

IF there is any way you can get your local shop to make more of these, I _know_ they will sell. There is nothing out there now I like as much.

__________________
"Muirne" --- Envious, ebony leather, LSD/ABS/AC/Monsoon w/6CD changer, mats, splash guards, DDM Stage II S/C, DDM stainless headers/cat/exhaust, DDM 4-piston brakes/slotted rotors, Probeam, Backbone, black "stubby" antenna, Lil' Chromies, K-sphere pedals, Kazera KZ-L wheels, the TWEETY door unlock/lock button, Garmin nuvi 750 GPS, High Note horn, Brushed Al door sills, etched/lighted WindRestrictor, white LED map/footwell lights, 3rd brake light pulser. --- She moves!
NASSOA Founding Member

I think these are the best looking panels I've seen on a Sol. I'd buy a set.

__________________
Carpe Diem
'Mysti' - '08 Mysterious 5-spd GXP, Ebony w/ red stitching, loaded, de-badged, BSR tune, Hahn I/C, K&N drop-in filter, Carolina Custom arm rests/door pockets, DDM ProBeam, splash guards, Pontiac vinyl bra (moded to fit GXP), Kappasphere wind restrictor, stubby antenna, ProClip cell phone holder, yellow calipers.