*GetYourWheels* Customer Rides and Wheel Gallery - Pontiac Solstice Forum
 1Likes
Reply
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 60 (permalink) Old 01-05-2017, 11:06 AM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
*GetYourWheels* Customer Rides and Wheel Gallery

Welcome to our GetYourWheels.com Customer Rides and Wheel Gallery for the SolsticeForum!

We are a new sponsor for the forum, we've done quite a few sets for our slingshot customers and they recommended we join the forum to help those of you looking for something to spice up the ride!

We wanted to introduce ourselves by giving you guys an inside look at the inside look at the day-to-day of GetYourWheels.

We'll keep this thread updated with what we feel are the most interesting sets of wheels that make it out each day!


First, the GetYourWheels showroom


The GetYourWheels Warehouse: we stock over 5,000 wheels so theres a good chance we have what you want!



We also offer black wheel weights for black/dark wheels, and silver for silver wheels. Saves our customers the hassle and there is nothing worse than having some shiny wheel weights on your new matte wheels show up.



To start it all off, here are some of the most popular custom Bespoke 3 Brushed and Polished finishes featured on Avant Garde Wheels all in one place:




Top Row, left to right: Brushed Grigio/Gunmetal M590, Brushed Stainless/Light Tint M580, Brushed Gloss Clear M510
Bottom Row: Brushed Matte Antique Bronze M590, Matte Antique Bronze M510

22" F130s with Brushed Matte Antique Bronze centers and Textured Black Lips for a Chrysler


Bronze Burst Super Deep Concave F14s all around for an Accord!


Prism Purple M510s


Vossen CVTs


Volk G27s in their AMAZING Prism Dark Silver finish!




We offer:
FREE Shipping
FREE Mounting and Balancing
Powdercoating and Custom Finishing Services
4 Week Forgestar & Avant Garde build times!


We also offer matching Silver/Gunmetal/Black valve stems with our TPMS sensors!


Any customers are also welcome to post photos of their wheels here as well! Check back often for daily updates!

Like what you see? If you have any questions or inquiries, please contact me at [email protected] or 562-219-2525

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
Sponsored Links
Advertisement
 
post #2 of 60 (permalink) Old 01-05-2017, 11:06 AM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Forgestar wheels are a modular, full-faced and deep concave wheel that is strong, lightweight and reasonably priced!

Forgestar customizes each wheel and offset based on your order, so you can get the exact fitment you want.
Lots of space for BBK clearance and custom finishes are also available.

We are one of Forgestar's largest retailers in the industry.


We offer:

Semi Concave - Almost flat, but it has a subtle concavity to the face. These look great and work great for a classy & OE look and feel.
Deep Concave - Much more aggressive concavity to the face, and very noticeable. Available in 9.5" - 12" wide only.






Weights
18x8.5 - 18.4 lbs
18x9.5 - 20.2 lbs
18x10 - 19.5 lbs
19x8.5 - 23.8 lbs
19x10 - 25 lbs

Here is a set of Deep Concave 20x9.5 20x11 F14s we built for our customer's S550 GT PP in under 2 weeks!
We'll be wrapping them with some meaty 275/35/20 315/35/20 Michelin PSS, and black TPMS Sensors

Installed photos to come!
20x9.5 +25 - 26.4 lbs
20x11 +55 - 26.5 lbs


Two Stage Laser Purple F14s (Upgraded finish)


F14s Custom Painted to match the OEM Ford Grabber Blue (Upgraded Finish)



F14s in a two-stage Matte Candy Red Powdercoat



[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #3 of 60 (permalink) Old 01-05-2017, 11:07 AM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
CF10s Custom Painted to match the OEM Porsche Sapphire Blue Metallic (Upgraded Finish)




Powdercoated Two Stage Candy Sapphire



Matte Black (Back) vs Textured Black (Front)


We also offer multi stage Brushed and Polished finish for an additional cost!
F14s in Matte Antique Bronze (Polished wheel w/ Matte Bronze Clearcoat)
CF10s Brushed with a Lightly Tinited Clearcoat







Many more options available!



Contact me [email protected] or call 562-219-2525 with any questions and I'd be happy to help you out

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #4 of 60 (permalink) Old 01-05-2017, 11:38 AM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
We've done a number of Solstice setups so far, and those customers recommended we jump on the forum.
We'll be posting more Solstice specific setups we've done in the near future so keep an eye out!

For the Solstice we've done as wide as 9" front and 9.5" rears
I dont believe the car has much more room to fit anything wider without hitting inner suspension components.

Here is a setup we did for Solstice Forum member roxer, running 18x8.5/9.5 Forgestar F14s running beefy 245/275 tires
Fitment is a little aggressive, but it looks great!






We built his wheels with a gorgeous custom upgraded Brushed Silver finish




The 9.5 seems to be about as wide as you can fit on the rear, heres a shot of how the rears fit, its about as close to the inner suspension components as you'd want to go:



We've also had a lot of luck with 9" all around with 275 square tires on the Solstice. Stay tuned for some pics of this setup in the future!

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #5 of 60 (permalink) Old 02-13-2017, 12:48 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Here are some shots from our customer's C7 Z06 sporting a set of Gloss Gunmetal CF10s in 19x10/20x12



This customer actually has TWO sets of CF10s, the other in Bronze Burst so we'll be able to share some pics of those when they're mounted!

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #6 of 60 (permalink) Old 02-14-2017, 04:48 AM
Member
 
blackbirdracing's Avatar
 
Join Date: May 2011
Location: South Elgin , IL
Posts: 960
So where do we find pricing on the custom offset wheels.

I'd like 9-9.5" wheel, proper offset as to not poke out to bad.

And as reasonable as possible.

Mods... LDK short block P werks tune, P werks CAI/ turbo inlet pipe, P werks hot & cold side piping, P werks rear suspension brace, Pwerks Valve springs, Pwerks intercooler, Pwerks phonelic spacers, Pwerks Hf cat, GM 3bar map sensors, Pwerks cross drilled / slotted rotors, Hawk HPS pads, Pwerks stainless steel break lines, Solo Street race exhaust, street edition headlights, DDM 6000K hids.
blackbirdracing is offline  
post #7 of 60 (permalink) Old 02-14-2017, 06:00 AM
Member
 
roxer's Avatar
 
Join Date: Aug 2014
Location: NC
Posts: 772
Garage
These guys did an awesome job and I love what I have. Go with 9" in the back if you do not want poke. Mine poke because of the tire and not the rim (rim is actually flush at 9.5"). 9" all the way around is a good fit for these cars.

.
2002 Isuzu Rodeo Sport 3.2L 4x4 - Still kicking!
2007 Mysterious Solstice GXP (女妖 - Banshee) - Manual - MODS LISTED HERE
2008 Polar Sky Redline (白影 - White Shadow) - Auto - Fully Loaded

roxer is offline  
post #8 of 60 (permalink) Old 02-14-2017, 10:30 AM
Member
 
Join Date: May 2015
Location: Detroit
Posts: 384
Quote:
Originally Posted by blackbirdracing View Post
So where do we find pricing on the custom offset wheels.

I'd like 9-9.5" wheel, proper offset as to not poke out to bad.

And as reasonable as possible.
9.5" with +45mm offset sticks out, see images in this thread page 4: https://www.solsticeforum.com/forum/f...65/index3.html

"You are the product" - Autoguide.com group forums
Steelmesh is offline  
post #9 of 60 (permalink) Old 02-14-2017, 04:25 PM
Member
 
ChopTop's Avatar
 
Join Date: Dec 2012
Location: Hooterville, MI
Posts: 6,720
Wider wheels problems solved w/Normsfiberglass custom widen rear fenders.I believe these are only one inch wide but can be built wider.




.
.
.
.
.
Mr & Mrs ChopTop's 09 Fastback & 06 Vert Mods thread:https://www.solsticeforum.com/forum/f...session-75468/ Original join date; Oct 2005 under LowLife handle.
ChopTop is offline  
post #10 of 60 (permalink) Old 02-14-2017, 04:29 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Heres a set of the classic AG M510s in 20x10 deep concave all around, installed on our customer's A5 Cabriolet with 275 tires all around

getyourwheels is offline  
post #11 of 60 (permalink) Old 02-14-2017, 07:25 PM
Member
 
The_Ghost's Avatar
 
Join Date: Sep 2012
Location: Waterford, MI
Posts: 3,613
So would an offset of 44 work on our cars? I really want the Mach M7 wheels.... I want the 6 spoke wheel.

____________________________________________

Solo Street Race exhaust
Fujita CAI
ASAP T2 stripes and badging
Windrestrictor V2 lighted in white
Windrestrictor lighted door sills lighted in white
DDM Works IC Piping
Undercar LEDs in white to match Windrestrictor

ZZPerformance dyno tuned - 286HP, 317ft/lbs of torque at 23psi of boost.
The_Ghost is offline  
post #12 of 60 (permalink) Old 02-28-2017, 02:14 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Quote:
Originally Posted by blackbirdracing View Post
So where do we find pricing on the custom offset wheels.

I'd like 9-9.5" wheel, proper offset as to not poke out to bad.

And as reasonable as possible.
Check out our site for pricing on specific wheels. If anything, let me know which wheel you're looking at and and the specific sizing and I can get your priced out. E-mail me at [email protected]

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #13 of 60 (permalink) Old 02-28-2017, 02:19 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Our customer, Ryan, just sent in photos of his Audi S3 sitting on a set of Vertini RF1.1 in the Brushed Titanium finish!









Many other finishes available for these RF1.1 and built the spec for this Audi S3!

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #14 of 60 (permalink) Old 02-28-2017, 02:19 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
Had a customer come by today with his Lexus RC-F to bring his car all together with his new suspension setup and I'll say its definitely come together nicely.

Lexus RC-F
Forgestar CF5V coated to Gloss Gunmetal








[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
post #15 of 60 (permalink) Old 02-28-2017, 02:21 PM Thread Starter
Member
 
getyourwheels's Avatar
 
Join Date: Oct 2016
Posts: 380
It's always nice to see these classic wheels going strong even through the small changes over the years!

Volk TE37 in Matte Black. This set went on the new Lexus RCF.















We can get almost anything so give us a shout!

[email protected] Or Call (562)275-8268
FREE Shipping | FREE Mounting and Balancing
Social Facebook| Instagram | Twitter
getyourwheels is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac Solstice Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome