Adding a turbo to his mom's base model
1 - 2 of 2 Posts
Joined
·
6,755 Posts
Sorry, this was already posted a while back.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Oil return line - to Tee or not to Tee?
Forced Induction 2.4 l EcotecMy Werks turbo oil return tees, half going into a welded bung over the water pump blockoff / access plate (on the timing chain cover), and the other half going into the oil pan drain plug. Has anyone tried this with a single line? If so, did you experience any issues with heat, smoke, etc.? The...- 23
- 4K
-
raygun · updated
-
How to pick injectors for the LE5
Forced Induction 2.4 l EcotecHave been reading up on injectors and am trying to plan out what I'll need for the build. What are the ways to tell if you need high or low impedance, the required duty-cycle, size, etc? It seems like there's a crazy variance in types and options out there..... Thanks in advance.- 12
- 5K
-
idkfa · updated
-
2.4 NA Werks Stage 2
Forced Induction 2.4 l EcotecSooo, I just did it... Werks Solstice/SKY 2.4L Stage 2 375hp Turbo Kit - Wastegate/BOV Color: Red - Pipe Finish: Brushed Aluminum - Turbocharger: Journal Bearing - Wastegate Option: Route Back Into Exhaust - Cat option: High Flow Cat I will use this thread to post details about my...- 11
- 1K
-
anothermichael · updated
-
Supercharger Installation
Forced Induction 2.4 l EcotecI spent three days last week in Phoenix with Santiago Feria installing a DDM Rotrex Supercharger kit. Sorry there are no in-progress photos. While Santiago did most of the work, I was busy with the simpler tasks. The results are as effective as they are pretty. Pep is amazing even though we...- 9
- 1K
-
stevebot39 · updated
-
Question on using a upgraded P WERKS / DDM etc 2.0 Intercooler on a 2.4?
Forced Induction 2.4 l EcotecI'm running a big turbo build 2.4 and my Percision intercooler is not working what so ever. So I'm looking at the big intercooler that they make for the 2.0 rated to 675HP. My question is will it bolt into my car and will my bumper fit or what is all different in the sheet metal / mounts...- 3
- 550
-
Brian85 · updated
Join now to ask and comment!