Pontiac Solstice Forum banner
1 - 20 of 120 Posts

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #1 · (Edited)
Welcome to our GetYourWheels.com Customer Rides and Wheel Gallery for the SolsticeForum!

We are a new sponsor for the forum, we've done quite a few sets for our slingshot customers and they recommended we join the forum to help those of you looking for something to spice up the ride!

We wanted to introduce ourselves by giving you guys an inside look at the inside look at the day-to-day of GetYourWheels.

We'll keep this thread updated with what we feel are the most interesting sets of wheels that make it out each day!


First, the GetYourWheels showroom


The GetYourWheels Warehouse: we stock over 5,000 wheels so theres a good chance we have what you want!



We also offer black wheel weights for black/dark wheels, and silver for silver wheels. Saves our customers the hassle and there is nothing worse than having some shiny wheel weights on your new matte wheels show up.



To start it all off, here are some of the most popular custom Bespoke 3 Brushed and Polished finishes featured on Avant Garde Wheels all in one place:




Top Row, left to right: Brushed Grigio/Gunmetal M590, Brushed Stainless/Light Tint M580, Brushed Gloss Clear M510
Bottom Row: Brushed Matte Antique Bronze M590, Matte Antique Bronze M510

22" F130s with Brushed Matte Antique Bronze centers and Textured Black Lips for a Chrysler


Bronze Burst Super Deep Concave F14s all around for an Accord!


Prism Purple M510s


Vossen CVTs


Volk G27s in their AMAZING Prism Dark Silver finish!




We offer:
FREE Shipping
FREE Mounting and Balancing
Powdercoating and Custom Finishing Services
4 Week Forgestar & Avant Garde build times!


We also offer matching Silver/Gunmetal/Black valve stems with our TPMS sensors!


Any customers are also welcome to post photos of their wheels here as well! Check back often for daily updates!

Like what you see? If you have any questions or inquiries, please contact me at [email protected] or 562-219-2525
 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #2 ·
Forgestar wheels are a modular, full-faced and deep concave wheel that is strong, lightweight and reasonably priced!

Forgestar customizes each wheel and offset based on your order, so you can get the exact fitment you want.
Lots of space for BBK clearance and custom finishes are also available.

We are one of Forgestar's largest retailers in the industry.


We offer:


Semi Concave - Almost flat, but it has a subtle concavity to the face. These look great and work great for a classy & OE look and feel.
Deep Concave - Much more aggressive concavity to the face, and very noticeable. Available in 9.5" - 12" wide only.






Weights
18x8.5 - 18.4 lbs
18x9.5 - 20.2 lbs
18x10 - 19.5 lbs
19x8.5 - 23.8 lbs
19x10 - 25 lbs

Here is a set of Deep Concave 20x9.5 20x11 F14s we built for our customer's S550 GT PP in under 2 weeks!
We'll be wrapping them with some meaty 275/35/20 315/35/20 Michelin PSS, and black TPMS Sensors

Installed photos to come!
20x9.5 +25 - 26.4 lbs
20x11 +55 - 26.5 lbs


Two Stage Laser Purple F14s (Upgraded finish)


F14s Custom Painted to match the OEM Ford Grabber Blue (Upgraded Finish)



F14s in a two-stage Matte Candy Red Powdercoat


 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #3 ·
CF10s Custom Painted to match the OEM Porsche Sapphire Blue Metallic (Upgraded Finish)




Powdercoated Two Stage Candy Sapphire



Matte Black (Back) vs Textured Black (Front)


We also offer multi stage Brushed and Polished finish for an additional cost!
F14s in Matte Antique Bronze (Polished wheel w/ Matte Bronze Clearcoat)
CF10s Brushed with a Lightly Tinited Clearcoat







Many more options available!



Contact me [email protected] or call 562-219-2525 with any questions and I'd be happy to help you out
 

·
Registered
Joined
·
3,609 Posts
You stated above, "Welcome to our GetYourWheels.com Customer Rides and Wheel Gallery for the SlingshotForums!"

You DO realize that you are in the Solstice forums I hope. If you try to sort the wheels that come up in a search all you get is an error. Your site is pretty but doesn't work very well.
 

·
Registered
Joined
·
7,480 Posts
I just checked the vendor sub forum and they are now listed as being a forum sponsor.

Question for Get Your Wheels, what is your recommendation for the widest wheels $ tires for the Kappa platform? Read that as wider than OEM.
 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #9 ·
Thanks for the warm welcome guys!
We've done a number of Solstice setups so far, and those customers recommended we jump on the forum.
We'll be posting more Solstice specific setups we've done in the near future so keep an eye out!

For the Solstice we've done as wide as 9" front and 9.5" rears
I dont believe the car has much more room to fit anything wider without hitting inner suspension components.

Here is a setup we did for Solstice Forum member roxer, running 18x8.5/9.5 Forgestar F14s running beefy 245/275 tires
Fitment is a little aggressive, but it looks great!






We built his wheels with a gorgeous custom upgraded Brushed Silver finish




The 9.5 seems to be about as wide as you can fit on the rear, heres a shot of how the rears fit, its about as close to the inner suspension components as you'd want to go:



We've also had a lot of luck with 9" all around with 275 square tires on the Solstice. Stay tuned for some pics of this setup in the future!
 

·
Registered
Joined
·
7,480 Posts
What's your opinion on different size wheels? Not in width, but height. I've notice some people are beginning to buy larger wheels on the rear than the ones on the front. For example, 19s on the front and 20s on the rear. TIA
 

·
Registered
Joined
·
7,480 Posts
So I take it that you don't actually read what's posted here, or is this an indication of customer service?

What's your opinion on different size wheels? Not in width, but height. I've notice some people are beginning to buy larger wheels on the rear than the ones on the front. For example, 19s on the front and 20s on the rear. TIA
 

·
Registered
Joined
·
3,609 Posts
So I take it that you don't actually read what's posted here, or is this an indication of customer service?
Yep, not paying attention. Probably sponsoring 100s of different forums and aren't paying attention to any of them...
 

·
AKA SolWhat?
Joined
·
10,607 Posts
Yep, not paying attention. Probably sponsoring 100s of different forums and aren't paying attention to any of them...
Even that they are posting on a forum (Tires and Wheels) that is sponsored by a competitor, Discount Tire, rather than their own forum in the supporting vendor category. Some people just aren't clear on the concept.

:rofl:

.
 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #14 ·
What's your opinion on different size wheels? Not in width, but height. I've notice some people are beginning to buy larger wheels on the rear than the ones on the front. For example, 19s on the front and 20s on the rear. TIA
So I take it that you don't actually read what's posted here, or is this an indication of customer service?
Sorry! this forum takes a bit to load for me and so I do skip a lot of posts when it gets busy here.

I usually advise on getting the same diameter front to rear but the difference in size is really up to you.
 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #15 ·
setting up a customer with a set of Gram Lights 57Xtreme by Rays Engineering in the Bronze finish wrapped up in some Bridgestone Potenza RE760 Sport! Can't wait to see these mounted.











 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #16 ·
Customer sent in some photos of his own Ferrari F360 setup with a set of Avant Garde M610 in the standard Brushed Liquid Silver finish!








 

·
Premium Member
Joined
·
2,042 Posts
These are the guys that made my custom duplicates for my Mallett. Great bunch of guys. Need to send them a picture. Glad they took my suggestion and came to the site. I actually tried to get them to go to the Arkansas national, but was too short of notice. Again, a pleasure doing business with them, real close on delivery date, and mine were 100% one off. Thanks guys.
 

·
Premium Member
Joined
·
416 Posts
Discussion Starter · #19 ·
These are the guys that made my custom duplicates for my Mallett. Great bunch of guys. Need to send them a picture. Glad they took my suggestion and came to the site. I actually tried to get them to go to the Arkansas national, but was too short of notice. Again, a pleasure doing business with them, real close on delivery date, and mine were 100% one off. Thanks guys.
Thanks for the kind words and glad we were able to get you on your set!

do you have anything in a minilite style?

Bill
Hey Bill,

I don't think I have seen anything like that in a larger wheel size in a 5 lug.
 
1 - 20 of 120 Posts
Top