Pontiac Solstice Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter #1
Hi, I notice that my a/c was not working, so i found out that the connector for the high pressure A/c switch was broken, since I don't have a wiring diagram I don't know where each wire goes, Could anyone of you post a picture of the connector plugged into the switch? My car is a 07 Solstice GXP

All 3 wires where detached from the connector, I don't know if the 2 wires on the picture are in the correct place
 

Attachments

·
Super Moderator
Joined
·
5,955 Posts
The three pressure switch wires are connected:

TN = 1 = GND
OG/BK = 2 = Signal
GY = 3 = +5V

I have not found a connector diagram.
 
1 - 6 of 6 Posts
Top