Pontiac Solstice Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
266 Posts
Discussion Starter · #1 ·
Thanks to all who have posted repair info... I will be repairing my INTERIOR driver door pull and my EXTERIOR passenger door pull very soon. How's that for luck? I also have to reglue my rear window. Searching got me all of the info I need. I'll add a post if I discover something worth sharing.

See you on the highway!

Backstage
Navigator - The Lost Sol Squadron
 

·
Registered
Joined
·
572 Posts
Thanks to all who have posted repair info... I will be repairing my INTERIOR driver door pull and my EXTERIOR passenger door pull very soon. How's that for luck? I also have to reglue my rear window. Searching got me all of the info I need. I'll add a post if I discover something worth sharing.

See you on the highway!

Backstage
Navigator - The Lost Sol Squadron
Would you mind showing pics or a video of how to remove the plastic covering of the driver's side? The plastic covering that is left of the pedals and under the first (far left-side) AC vent. I got to removing the bolts under the steering wheel near the pedals and lifted the covering a bit but couldn't get any further as the covering runs up near the door seam. If this is what you're doing of course :lol: don't want you to be taking something off just to show me how to :lol:
 

·
Premium Member
Joined
·
18,503 Posts
Would you mind showing pics or a video of how to remove the plastic covering of the driver's side? The plastic covering that is left of the pedals and under the first (far left-side) AC vent. I got to removing the bolts under the steering wheel near the pedals and lifted the covering a bit but couldn't get any further as the covering runs up near the door seam. If this is what you're doing of course :lol: don't want you to be taking something off just to show me how to :lol:
If you go to my thread, you will find detailed photos of removing the entire interior, including the dash, seats, waterfall and carpeting.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top