Pontiac Solstice Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter #1
Reading the Pontiac Solstice Performance book How to Go Fast and Have fun. Page 79 lists ZOK parts, I see there is a listing for front and rear lower control arms. Are there different lower control arms when converting a FE3 to ZOK? The part numbers are 15224867/68 and 15224779/80
 

·
Registered
Joined
·
1,461 Posts
The book is in error with respect to the lower control arms.
IMO, I wouldn't go that far unless you have more proof than that thread linked with the shock, spring, and stabilizer bar part #s .

I consulted the same book, and to be more specific than the OP was, it gives part #s for front and rear lower control arms for upgrading a base (FE2) solstice. For a GXP (FE3) solstice, the lower control arms are already on the car (production part).

I checked out a few parts websites and 2 lower control arm options are listed for any given corner for a base fe2 solstice, which agrees with the book. Can't see the part #'s though.

FWIW, the part #'s given are for l/r of the front and rear, if you want to break them out and check.

I seem to remember lower control arm differences from the base to the GXP too, discussed back when the GXP first came out. Maybe I'm wrong though.

So to the OP, there is no lower control arm upgrade from FE3 to Z0K.
 

·
AKA SolWhat?
Joined
·
10,472 Posts
IMO, I wouldn't go that far unless you have more proof than that thread linked with the shock, spring, and stabilizer bar part #s .
I will yield to your statements since I do not have a copy of the book. I edited my previous message.

Thanks for the correction! :)
 
1 - 4 of 4 Posts
Top