Pontiac Solstice Forum banner

2021 AutoCross/Track car build thread

1 reading
52K views 271 replies 17 participants last post by  ConeHugger01  
2021.04.03: Wheels, lugs.

Tires test fitted. The wheels were a tight fit on the front wheels, there was a lot of friction to push them on even partway. I took a dremel sanding cylinder to the outer edge of the hub nose to clean it off. It only needed about 0.1mm removed for a better fit.
View attachment 112082

Lug nuts: Supplied from Motorsport-Tech stubby nuts have 6/7 threads; short size from Advanced Auto (Dorman) have 10/11 threads, Trans Am lugs with the outside threads for "fancy lugnut covers" have 13/14 threads. Stock Sky lugnuts are in the 9/10 range.
View attachment 112083

The medium length are perfect for the rear adapters. Notably both the stock Sky wheels and my BC wheels have recesses behind the areas between lug holes.

View attachment 112084

View attachment 112085

View attachment 112086


In other news, I got the front bumper better aligned and tightened up. Hopefully no need to take it off again for a while. The wheel well covers were reinstalled, using screws and flat nuts instead of the single-use christmas trees/push plugs.
Didn't you order custom wheels? Why the need for spacers?